BWKHJ - 81983 STYROFOAM BRAND SCORE BOARD EXTRUDED POLYSTYRENE
- MSDS: BWKHJ
- Manufacturer: DOW CHEMICAL U S A
- Product Name: 81983 STYROFOAM BRAND SCORE BOARD EXTRUDED POLYSTYRENE
- National Stock Number: 5640-00F037976
Product Identification
Product ID:81983 STYROFOAM BRAND SCORE BOARD EXTRUDED POLYSTYRENE
MSDS Date:06/13/1990
FSC:5640
NIIN:00F037976
MSDS Number: BWKHJ
Responsible Party
MIDLAND, MI 48674-5000
US
Emergency Phone: 517-636-4400
Info Phone: 517-636-4400
Cage: 71983
Contractor
Telephone: 517-636-4400
Cage: 71983
Ingredients
STYRENE POLYMER, POLYSTYRENE
CAS: 9003-53-6
RTECS: WL6475000
Fraction By Weight: 0-64%
DICHLORODIFLUOROMETHANE, FREON 12
CAS: 75-71-8
RTECS: PA8200000
Fraction By Weight: 0-7.5%
OSHA PEL 4950 MG/CUM
ACGIH TLV: 4950 MG/CUM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ETHANE, 1-CHLORO-1,1-DIFLUORO-, CHLORODIFLUOROETHANE (DOT),
CAS: 75-68-3
RTECS: KH7650000
Fraction By Weight: 0-10%
ETHYL CHLORIDE, CHLOROETHANE
CAS: 75-00-3
RTECS: KH7525000
Fraction By Weight: 0-4.5%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
POLYETHYLENE, POLYETHYLENE RESIN (HOMOPOLYMER); POLYWAX
CAS: 9002-88-4
RTECS: TQ3325000
Fraction By Weight: <10%
ETHANE-1-OCTENE COPOLYMER; POLYMER; POLYETHYLENE
CAS: 26221-73-8
Fraction By Weight: <10%
HEXABROMOCYCLODODECANE *94-4*
CAS: 3194-55-6
Fraction By Weight: 0-2%
1,2,3,4,5-PENTABROMO-6-CHLOROCYCLOHEXANE *94-4*
CAS: 87-84-3
Fraction By Weight: 0-2%
Hazards
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: IRRITATION/CORNEAL INJURY DUE TO
MECHANICAL ACTION. SKIN: MECHANICAL INJURY ONLY. INGESTION: MAY
CAUSE CHOKING. INHALATION: UPPER RESPIRATORY TRACT IRRITATION.
EXCESSIVE EXPOSURE TO ETHYL CHLORI
DE/DICHLORODIFLUOROMETHANE/CHLORODIFLUOROETHANE MAY CAUSE CNS
DEPRESSION/ANESTHETIC EFFECTS/IRREGUALR HEARBEATS. (SUPP)
Explanation of Carcinogenicity:NONE
Effects of Overexposure:IRRITATION, CHOKING
First Aid
First Aid:EYES: IRRIGATE IMMEDIATELY W/WATER FOR 5 MINS. INHALATION:
REMOVE TO FRESH AIR. OBTAIN MEDICAL ATTENTION IN ALL CASES.
Fire Fighting
Flash Point Method:CC
Flash Point:670F
Extinguishing Media:WATER FOG.
Fire Fighting Procedures:WEAR POSITIVE PRESSURE, SELF CONTAINED
BREATHING APPARATUS. APPLY LARGE VOLUME OF WATER DIRECTLY ON
FLAME/BURNING SURFACE.
Unusual Fire/Explosion Hazard:EMITS DENSE, BLACK SMOKE WHEN BURNED.
GRINDING/CUTTING MAY LEAD TO A BUILDUP OF DUST SUSPENDED IN AIR
WHICH CAN CAUSE A DUST EXPLOSION IF IGNITED.
Accidental Release
Spill Release Procedures:PICK UP/IF DUST/IN SMALL PIECES, SWEEP UP &
PLACE IN SUITABLE CONTAINER FOR DISPOSAL.
Handling
Handling and Storage Precautions:HANDLE & INSTALL PROPERLY. FOAM
PRODUCT SHOULDN'T BE STORED/USED IN CONFINED, AIRTIGHT SPACES.
Other Precautions:DURING SHIPPING, STORAGE, INSTALLATION & USE OF
MATERIAL SHOULDN'T BE EXPOSED TO FLAME/OTHER IGNITION SOURCES. THIS
INSULATION A FLAME RETARDANT ADDITIVE TO INHIBIT ACCIDENTAL
IGNITION FROM SMALL FIRE SOURCES.
Exposure Controls
Respiratory Protection:USE AN APPROVED AIR-PURIFYING RESPIRATOR. IN
DUSTY ATMOSPHERES, USE AN APPROVED DUST RESPIRATOR.
Ventilation:GENERAL/LOCAL EXHAUST TO CONTROL AIRBORNE LEVELS BELOW THE
EXPOSURE GUIDELINES.
Protective Gloves:NONE NEEDED.
Eye Protection:SAFETY GLASSES/CHEMICAL GOGGLES.
Supplemental Safety and Health
GAS FIRED RECIRCULATING AIR FURNACES/HEATERS/GAS WATER HEATERS, DRAWING
AIR FROM AREAS WHERE THERE MAY BE A PRESENCE OF ETHYL
CHLORIDE/DICHLORODIFLUOROMETHANE/CHLORODIFLUORETHANE GASES FROM
STORAGE/FA BRICATION OF EXTRUDED POLYSTYRENE FOAM,CAN BE SUBJECTED
TO RUST & CORROSION PROBLEMS FROM DECOMPOSITION.
Chemical Properties
Spec Gravity:0.027-0.064
Solubility in Water:INSOLUBLE
Appearance and Odor:RIGID CELLULAR FOAM BOARD W/NO ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
AROMATIC HYDROCARBONS, HIGHER ALIPHATIC HYDROCARBONS, ESTERS, AMINES,
HIGHER ALDEHYDES.
Stability Condition to Avoid:FIRE, HIGH TEMPS, TEMPS >572F.
Hazardous Decomposition Products:CO, CO2, CARBON, HYDROGEN BROMIDE,
HYDROGEN CHLORIDE, HYDROGEN FLUORIDE, AROMATIC HYDROCARBONS,
STYRENE, ETHYLBENZENE.
Disposal
Waste Disposal Methods:BURN IN AN APPROVED LANDFILL/BURN IN AN ADEQUATE
INCINERATOR W/EXCESS OXYGEN IN ACCORDANCE W/LOCAL, STATE & FEDERAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.